AI / ML & Computer Vision
CT Garud CT Flow Builder CT OCR / OCV CT Mikha Anomaly Detection BCFHS Vision Measurement Process Check EOL Inspection All vision →
IoT & Smart Factory
Production-Line Tracking EHS / Safety Tracker OEE & Condition Monitoring Digital Dashboards (DMS) NCMS CPAS All IoT →
Safety AI — Enterprise Monitoring Engineering & Machine Building Our Work Case Studies About Contact Get Free Assessment →
Book Free Assessment
Vision Automotive MeasurementAnalytics

Headlamp Alignment & Intensity Inspection

Verifies headlamp beam alignment and intensity against specification — misaligned lamps adjusted automatically via CAN / LIN communication.

Headlamp Alignment & Intensity Inspection
CAN/LIN
closed loop

/ The Challenge

Manual beam checks were subjective; misaligned or weak lamps escaped, a direct safety and compliance issue.

/ What We Deployed

Cameras measure beam pattern and intensity; the system commands automatic adjustment over CAN/LIN and rejects lamps out of spec.

/ The Results

  • Beam geometry measured objectively
  • Auto-adjustment closes the loop
  • Lighting compliance assured

Built With

Metrology
Vision Measurement
Non-contact dimensional gauging at 20µm precision. Thread, slot, diameter, gap — one frame.
Explore →
PLC Integration
Process Check
Vision-guided process-sequence interlock & manufacturing step verification with PLC/Modbus output.
Explore →

More in Automotive

Black Glue Detection on Glass
Vision Automotive
Black Glue Detection on Glass
Verifies black glue presence and continuity on black primer while the robot applies it — on gap detection the robot stops and the glass is reworked.
In-cycle robot control Case study →
Welding Quality Inspection — OK / Loose / Burnt
Vision Automotive
Welding Quality Inspection — OK / Loose / Burnt
Classifies every weld as OK, Loose, or Burnt and verifies Normal vs Side position — a part passes only with OK quality in Normal position.
3-class weld grading Case study →
Weld Bead Measurement
Vision Automotive
Weld Bead Measurement
Measures weld bead width, height, and continuity automatically against quality standards — objective weld measurement without manual gauges.
100% welds measured Case study →

/ Get Started

Have a Similar Problem?

Send us your part and inspection challenge. We'll run a free POC and show measured results — no commitment.

Book Free Assessment → See Case Studies